Vertical Autoclave - Single Lever
Vertical Autoclave - Single Lever Specification
- Type
- Vertical Autoclave, Floor Standing, Single Lever Locking.
- Chamber Size
- Standard options: 22L, 30L, 50L, 75L, 100L (Custom sizes on request).
- Chamber Thickness
- 4–6 mm heavy gauge SS chamber sheet.
- Outer Size
- As per standard laboratory sizes; typically custom sizes available on request.
- Compressed Air
- Not required; single lever locking mechanism eliminates need for compressed air.
- Door Type
- Single lever, vertical closing door, spring-loaded locking system for safety.
- Design Pressure
- 2.2 kg/cm² or higher as per industry standard.
- Working Pressure
- 1.2 to 1.5 kg/cm².
- Design Temperature
- 134°C maximum.
- Heat Uniform
- Uniform chamber heating by steam jacket.
- Insulation
- Glass wool thermal insulation, double-walled construction.
- Net Weight
- Approx. 80–150 kg depending on chamber size.
- Recording Parameters
- Digital display with cycle progress, temperature and pressure record.
- Spraying Mode
- Uniform steam distribution via inbuilt piping.
- Outer Trolley
- Optional stainless steel trolley for easy mobility.
- Inner Trolley
- Removable stainless steel basket/trolley for chamber loading.
- Spraying Piping
- Stainless steel inbuilt steam distribution pipework.
- Steam
- Saturated steam generated internally or by external boiler.
- Sterilizing Temperature
- 121°C to 134°C adjustable.
- Working Temperature
- Up to 134°C.
- Sterilization Time
- 0 to 99 minutes programmable cycle.
- Temperature Scope
- Ambient to 134°C.
- Piping System
- Corrosion resistant SS 304/SS 316 grade piping.
- Valves
- Safety valve, Pressure relief valve, Steam release valve.
- Power Consumption
- 2.5 kW to 6 kW depending on model.
- Heating Element
- ISI marked tubular immersion heaters; replaceable type.
- Control Panel
- Microprocessor-based programmable control with timer and alarm.
- Accessories
- Standard with perforated baskets and water draining port.
- Calibration
- Calibrated for temperature and pressure accuracy.
- Display Type
- Digital PID temperature controller, LED display.
- Power Supply
- 230V AC, 50 Hz (single phase); also available in 440V 3-phase.
- Pressure Gauge
- Analog and digital pressure gauge for monitoring.
- Water Level Sensor
- Automatic water level cut-off system.
- Installation
- Floor standing with optional wheel-mounted base.
- Material of Construction
- Stainless Steel SS 304/SS 316 grade both inner and outer chamber.
- External Finish
- Matte/brushed stainless finish; corrosion-resistant.
- Application
- Suitable for laboratory, medical, pharmaceutical, and research institutes.
- Safety Features
- Door safety interlock, over-temperature and over-pressure protection.

More Products in Autoclaves And Sterilizers Category
Vertical Autoclave
Type : Other, Vertical cylindrical
Outer Size : 600 mm x 400 mm
Door Type : Manual lid with radial locking system
Insulation : Double wall with glass wool insulation
Net Weight : Approx. 65 kg
Steam : Saturated steam, 0.150.22 MPa
Horizontal Rectangular Autoclave
Type : Other, Horizontal Rectangular Steam Autoclave
Outer Size : 2150 mm x 950 mm x 1300 mm (approx)
Door Type : Horizontal Automatic Sliding Door
Insulation : High grade mineral wool/ceramic fiber 75mm thick
Net Weight : 800 kg (approx)
Steam : Saturated, minimum 2 kg/cm² pressure
Instrument Sterilizer
Type : Other, Tabletop instrument sterilizer
Outer Size : 350mm x 500mm
Door Type : Manual hinged door
Insulation : Stainless steel outer shell
Net Weight : 25kg
Steam : External steam source required
Portable Autoclave
Type : Other, Vertical Portable Autoclave
Outer Size : 410 x 410 x 520 mm
Door Type : Screw Type Lid (Pressure Seal)
Insulation : Double Walled with Insulating Layer
Net Weight : 19 kg (approx.)
Steam : External or Builtin Electric Heater

Send Inquiry




